Where is the fuel pump located on a 2000 Mazda Protege?
When provided with the 1.6-liter engine, the fuel filter out for the 2000 Mazda Protege is beneath the automobile. When having a look upward from the ground view, it’s centered beneath the seating house. It will probably be fixed in the fuel pump module on top of the fuel tank.
Where is the fuel filter located on a Mazda Protege?
The fuel filter on the Mazda Protege is located on the firewall to the left and beneath the energy brake booster. Using a 10-mm socket and socket wrench, loosen the higher (outlet) fuel line clamp. Place needle nostril pliers between the filter out and the fuel line, and pry the line off the filter out.
Where is the fuel filter out on a 2003 Mazda Protege?
The fuel filter is all the time going to be found between the fuel tank and the engine. For maximum vehicles, the fuel clear out is located inside the top of the fuel tank, right where it connects with the fuel line, even though on some automobiles if may well be in different places alongside the fuel line.
Where is the fuel filter on a Mazda Protege 2003?
Where is the fuel pump located on a Mazda Protege?
The Mazda Protege uses an in-tank fuel pump assembly coupled with the fuel sending unit. Some in-tank fuel pumps are difficult to exchange, because the fuel tank must be removed. However, the Protege has a convenient fuel pump get right of entry to door fastened underneath the rear seat, which makes the process somewhat simple in comparison with every other automobiles.
How do you relieve fuel device pressure in a protege?
Crank the Protege’s engine to start out relieving the fuel device force. Remove the rear seat cushion through pulling the straps protruding from beneath the seat. Remove the Phillips-head screws from the fuel pump get entry to cover. Lift the cover away. Disconnect the visible electrical connection connected to the fuel pump access duvet.
How do you replace fuel pump get right of entry to duvet?
Replace the fuel pump get admission to cover. Tighten the quilt’s screws. Replace the rear seat cushion. Reconnect the destructive battery cable. Insert the key into the ignition. Turn the key to “On” for about 10 seconds, then turn it off. Repeat the process once to rebuild the fuel system force.
How do you replace a gasket on a fuel pump?
Wipe the contact space with a clean, dry rag. Insert the new fuel pump assembl, along side the new gasket. Tighten the mounting screws, reconnect the electric connection and the supply/return hoses. Replace the fuel pump get entry to cover.